HomeProducts

All Products (Total 260 Products)

Phoenix Screw Sonnect Terminal Block

Unit PriceUSD 0.272 / Piece/Pieces

Min.Order Unit Price
100 Piece/Pieces USD 0.272 / Piece/Pieces

Brand: Wonkedq

Packaging: Carton

Supply Ability: 99999999999999999999999999

Min. Order: 100 Piece/Pieces

Model No.: JUK 25

JUK 25 Din Screw connect terminal blocks 25mm The internationally recognized screw connection meets the most stringent requirements and covers a wide area of application. For the most stringent requirements: the screw connection has also proven itself in the wiring of large conductor cross sections. A nominal current...
UKK Power Distributor Box

Model No.: UKK 500A

Distribution Block is IP20 with fingersafety transparent covers design provides excellent protection from accidentally touching live parts without additional cost . Can be easily mounted on standard DIN 35mm rail or direct mounted to the wall of your enclosure. Fixed DIN rail or mounted on the panel by screws: easy to...
Single Pole Distribution Block

Model No.: UKK 400A

Distribution blocks is economical and convenient Ways to distribute circuits from a single input Source, to several devices in the branch circuit. Thereby reducing Total number of wires in the switchboard and save your time and money. Snap mounting is used for DIN rail. Hinge or removable lid-easy to assemble. IP20...
Power Distribution Terminal Block

Model No.: UKK 250A

Using a Distribution Block eliminates the need to wire each device in the control circuit back to the power source by using one large wire on the input side, and several smaller wires on the output side to your devices downstream. This will give your electrical panel a clean and professional look. Simple and safe...
Junction Connector UKK Terminal

Model No.: UKK 160A

The size of the UKK160A conductor's cross-section continues to increase, and it takes up the smallest space. The focus has been placed directly on the user's distribution board. This design ensures that the distribution block has excellent user-friendliness. Install on DIN rail or install screws through flange. All...
DIN Rail UKK Distribution Box

Model No.: UKK 125A

UKK 125A DIN rail screw power distribution block power supply is a DIN rail unipolar junction box waterproof terminal block with a compact hinged removable cover design, which plays an important role in the power distribution industry. The product has excellent electrical contact, easy to visually confirm and check...
Spring Clamp Terminal Block

Model No.: 284-681

284-681 Cable Spring Connector 3 Conductor Through Terminal Blocks The spring rail-mount terminal blocks systems use proven spring pressure connection technology, reducing service costs and increasing system uptime and reliability. Made from engineering flame resistant nylon PA66, brass conductor, stainless steel...
Din Rail Spring Clamp Terminals

Model No.: 282-901

282-901 DIN rail 2 Conductor Spring Terminal Blocks System FACTORY The spring rail-mount terminal blocks systems use proven spring pressure connection technology, reducing service costs and increasing system uptime and reliability. Same shape as feed-through terminal blocks, knife connectors, and disconnect terminal...
Spring Mount Terminal Blocks

Model No.: 281-652

281-652 Spring Connecting Multi Conductor Terminal Blocks DINrail The spring rail-mount terminal blocks systems use proven spring pressure connection technology, reducing service costs and increasing system uptime and reliability. Made from engineering flame resistant nylon PA66, brass conductor, stainless steel...
Spring DIN Terminal Block

Model No.: 281-901

281-901 Din Rail Mount Spring Cage 2 Conductor Through Terminal Blocks The spring rail-mount terminal blocks syste of the advantages of this type of rail is that the terminal blocks can be snapped onto the rail in only one direction. This insures that the live electrical components of one block cannot come into...
Spring Type Din Rail Terminals

Model No.: 280-901

280-901 Din Rail Spring Cage Terminal Blocks CAGE CLAMP Compared with the screw crimp terminals the connection mode of spring series is simler and pressing the spring tightly can easily connect the wire without screwing.Each terminal block has a specialized locus for the installation of marker bar and this is...
Push in Connector For Junction Box

Model No.: 773-606

773-606 Push In Quick Splice Connectors 1.DESCRIPTION: The 773 series push-in connectors make the connecting easily save time and money in distribution boxes or junction boxes.With the compact body, we can make connecting possible to be done in the narrow space and enable the high wiring density. The push-in...
One In Two Out Terminal Blocks

Model No.: JPT 2.5-TWIN

NEWEST Push-In Technology DIN Rail type Terminal Blocks is more easy handling and faster than other universal terminals .people can insert the wire directly without any tools . Made from Nylon PA66 and Copper conductor Improve work efficiency Stainless spring is more tighten Technical Parameters
Spring Screwless Terminal Block

Model No.: JPT 2.5-QUATTRO PE

The Push-in direct connection technology make the insertion forces reduced by up to 50 percent and tool-free wiring, enable the conductors to be inserted easily and directly the plastic part made from Inflaming retarding PA 66, the conductor is copper and stainless spring. Easy handling for tool free Compact and multi...
Tool free spring terminal block

Model No.: JPTTB 2.5-PE

our New technology push in connection terminal block which is more convenient and save time to improve work efficiency. You can insert the wire directly without any tools, it is more convenient than other universal type terminal block and if you need release the wire , you can push the orange button with any tools....
Din Rail Test Terminal Block

Unit Price: 0.3~0.65USD

Min. Order: 100 Piece

Model No.: JURTK S/S

Application: Cable

Environmental Protection: Resistance to Environmental

Connection Mode: Push-Pull Connection

JURTK/S Screw Connection testing disconnect terminal connector blocks The URTK test disconnect terminal block were developed specifically for use in current transformer secondary circuits Can be fitted on both sides with fixed and switchable bridges as well as test sockets with a 4 mm diameter. The high reliability...
Double Connect Din Rail Terminal Block

Model No.: JUK-5TWIN

JUK 5TWIN Rohs One In Two Out Multi Conductor Terminal Blocks Din Rail UK5 TWIN Din Rail terminal blocks, can be installed on various types of 35mm rails. These twin modular terminal blocks are designed for the basic task of potential branching. Screw connections continue to dominate industrial connection technology....
Knife Disconnect Terminal Block Din Rail

Model No.: JUK 5-MTK-P/P

JUK 5 MTK PP Knife Disconnect Terminal Block with Test Socket Screw Disconnect terminal blocks enable you to maintenance work or rapid troubleshooting and permits inspection work to ,be carried out under without voltage conditions. The highest voltage it can withstand is 800v. It can used for various different...
Double DINrail Terminal Blocks

Model No.: JUDK 4

JUDK4 Feed Through Screw Connection Multi Conductor Terminal Blocks Feed-through terminal blocks are universally accepted solutions for all semiconductor connection needs, no matter what size. The proven design of the blocks saves valuable space and comes with screw technology for easiest possible use. It allows the...
Front Entry DIN Rail Terminal Block

Model No.: JPT 4-PE

The spring-cage connection system for vibration-sensitive applications exerts a constant force on the wire, thus achieving a vibration-proof, air-tight connection. The front connection design allows screwdrivers and wires to enter from the same front direction, making it easy to view the wiring. Nylon PA66 modular...
High Current Terminal Connector

Model No.: JUKH 240

JUKH 240 din rail screw locking high current connector terminal blocks High Current Terminal Block of UKH250 by centralizing three conductor points at the base of the prismatic support ensures a reliable short circuit. Screw locking due to the spring element in the terminal body. Low contact resistances of the contact...
Rail Mounted Terminal Block

Model No.: JUKH 150

JUKH 150 High Current Spring Cage Clamp rail monted Terminal blocks The metal portion of the UK Series terminal blocks are made from high-grade, strain-crack and corrosion proof copper alloys. They won’t experience any electrolytic corrosion or rusting, even when moisture is present. The metal surfaces are protected...
Spring Feed Through Terminal Block

Model No.: JPT 2.5 PE

Spring Feed Through Terminal Block The grounding modular terminal With a single click, PT series ground modular terminal blocks can simply snap onto the DIN rail to create the PE connection. Also available with Din Rail Terminal Block , Push In terminal block, Spring terminal block and screw terminal block Reduce 50%...
High Voltage Terminal Blocks

Model No.: JUKH 95

JUKH 95 DIN rail mounted high voltage component terminal blocks The grey high voltage component terminal blocks -UKH 95 from has 2 connections on one level and is suitable for cross-sections of 25-95 mm² (AWG: 4-3/0). The current rating is 232 at 1,000 V. The compact design with a width of 25 mm and a height of 90 mm,...
Home > Products

New Products

Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send